What Is E6000?
It’s a tough, flexible and highly versatile rubber based glue that exhibits exceptional adhesive, contact adhesive and sealant qualities. It’s washer and dryer safe (commonly known as waterproof).
What kind of surface does it works on?
E6000 will adhere to almost any surface, although it is not recommended for use on styrofoam. It especially works well on wood, glass, metal, fiberglass, ceramics, masonry, concrete, leather, rubber, vinyl, plastics and our favourite Swarovski Crystals.
9ml - $5.50
29.7ml - $15.00
WARNING (Please Read Before Order)
After gluing do not move or touch the project for at least 24 hours, it’s best to leave it for about 72 hours for a strong bond. This is because it’s a one pot air dry glue please wait until all the solvent has evaporated.
E-6000 hardens by solvent evaporation and forms an immediate bond that is difficult to reposition after both adhesive coated surfaces are placed in contact with each other and sufficient pressure is exerted to establish full contact.
To extend life of product, be sure cap is secured back to original position. Use a toothpick as a disposable applicator for very small applications such as beading. Remove, recap and allow plastic nozzle to dry. Remove dried product from nozzle by pulling out through threaded end and reuse nozzle
Performs best when applied at 70 to 85 degrees F. When fully cured, product can withstand temperatures between -40 and 150 degrees F
How To Order ?
No comments:
Post a Comment
comments